- 99.97% efficient, long-life HEPA filter removes particles as small as 0.3 microns
- Standard MERV 7 pre-filter
- Nominal 500 CFM
- Meets or exceeds the ASHRAE Standard 170: Ventilation of Health Care Facilities
- HEPA filter rack and sealing design meet air leakage requirement
- Vertical design for smaller footprint
- Portable and adaptable to nearly any appropriately-sized location
- Heavy-duty, lockable casters for easy transport
- Red lighted indicator to alert user when filters are overloaded
- Green on/off switch illuminates to verify when running
- 5 selectable motor speeds for a wide range of airflow
- 3-second motor start delay
- 3 meter long power cord with strain relief
- Exhaust transition plate to standard 10-inch round (005 size)
- Galvanized steel, pre-painted cabinet is fully insulated
- 230V / 50 Hz / 1-Ph
- High performance filtration and UVGI options
Additional Product Details
Pre-Installed Filters
- The Carrier OptiClean™ ships with two filters pre-installed for your convenience: a minimum MERV 7 pre-filter and a HEPA filter
- The minimum MERV 7 pre-filter recommended replacement is 60-90 days and should be available locally*
- The long-life HEPA filter provides approximately 40,000 hours of operation, or four years, under normal operation and maintenance*
*Applies to negative air machine applications only. Filter life in air scrubber applications would be reduced.
Multi-Function Control Panel
- On/Off Switch – A green on/off switch illuminates when the unit is on and operating
- Filter Alert – A red light illuminates when it is time to check and/or replace one or both of the unit’s filters
- Pressure Indicator – Compares room/ambient pressure versus internal pressure on the back side of the HEPA filter. Sets off the red indicator light when the filters are dirty
Additional Features
- Locking casters and round duct transition assembly are shipped with every unit
- Fan Motor Type: ECM 1/2HP
